What are the general adjustment methods for Pneumatic Air Spray Gun?- Ningbo Datian Tools Co., Ltd.

Pneumatic Air Spray Gun Manufacturers have three ways to adjust the spraying status of the spray gun:

1. Adjust the shape and size of the spraying fan through the fan regulating valve;

2. Regulate the flow of paint through the paint regulating valve;

3. Adjust the inlet pressure and air volume through the air pressure regulating valve.

air pressure regulating valve

① If the inlet pressure is too high, you can turn the air pressure regulating valve clockwise to reduce the air pressure of the spray gun to the standard value specified by the manufacturer.

②If the air inlet pressure is too small, by turning the air pressure regulator valve counterclockwise, the air pressure of the gun can be increased to the standard value specified by the manufacturer.

Sector control valve

A rotary fan adjustable valve can be used to increase the spray width at the time of manufacture.

Rotary fan valve can be adjusted to reduce spray pattern.

paint control valve

(1) The paint control valve can increase the stroke of the gun to increase the flow of paint. Rotate paint adjustment valve to reduce gun fill stroke to allow paint flow rate.

The general adjustment method of the spray gun is as follows:

1. Check the spray gun

1) Check the pores on the paint can to make sure they are not clogged with dirt and remain unobstructed.

2) Check the sealing ring and connecting parts on the spray gun to make sure there is no paint leakage.

2. Adjust the spray gun

1) Adjust the pressure

2) Adjust the fan width and the size and direction of the mist beam

3) Paint flow regulation

4) Paint distribution test

Water-based paint spray gun -HVLP-W-960

Caliber:1.3mm 1.4mm 1.7mm

Feeding method:gravity type